Marco UP14/E-DX 12/24V Electronic dual pump system + PCS 92 l/min – Code 16469115
Na zalihi
Vrijeme pripreme za slanje za sve artikle je oko 2-3 dana.Self-priming water pressure systems with two connected pumps with electronic control Speed motor related to the flow rate. Delayed start of the auxiliary pump. Reduced consumption and noise. Accumulator tank is not required. Protected against overloads. Pump functions monitored by 2 led. “Empty tank” signal and shut-off device.
| Part n. | 16469115 |   |
| Product Name | UP14/E-DX | |
| Voltage (V) | 12-24 | |
| Consumption (A) | 32/16 | |
| Fuse (A) | 30×2 | |
| Self-priming (m) | 3 | |
| Flow rate (l/min) | 92 | |
| Hose (mm) | ||
| Pressure (bar) | 2.5 | |
| Ports (BSP) | 1″ | |
| Motor power (W) | 400×2 | |
| Weight (kg) | 17 |
PCS 12/24V Control panel for electronic pumps
The control panel for electronic pumps allows to remotely monitor the operation of the pump and interact with it. It is in fact possible to see when the pump is On and if there is still liquid to be transferred. Moreover, in case of arrest due to end of liquid or overload you can reset the alarm and restart the system without having to turn off the power. Finally, you can turn Off and On the pump with the simple push of a button. The panel can be mounted or recessed in a circular hole of diameter 70 mm, or with external mounting by fixing the provided square box with two screws. To operate simply connect the pump with the 3m cable supplied or another 4-wire phone cord and double-ended RJ11 / 6. In the back there is a terminal block that allows you to replicate the buttons and LEDs of the panel on an external circuit: this allows you to individually control the features on the dashboard or in a device designed by third parties.
| Weight | 3 kg |
|---|---|
| Kategorija 1 | |
| Kategorija 2 | |
| Kategorija 3 | Pumpe vode MARCO (electronic) |
| Carinski kod | |
| Originalno pakiranje | |
| Proizvođač | |
| Mjerna jedinica |